{"product_id":"hobby-heaven-zephyr-0-5mm-nozzle-cap-hha-2302","title":"Hobby Heaven Zephyr 0.5mm Nozzle Cap (HHA-2302) – Replacement Airbrush Spare","description":"\u003cp\u003eOnce a Zephyr runs at 0.5 mm, thanks to the HHA-2002 set, its front end needs the larger nozzle cap, and this is that cap on its own. It is the knurled, polished piece the nozzle sits inside, with an opening matched to the 0.5 mm nozzle so the air surrounds the heavier flow evenly. Painters move to the 0.5 mm setup for primer, varnish and metallic paints. Order this one when a cap is lost, dented or will not seat, and the nozzle and needle behind it are undamaged.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSized for nozzle HHA-2102 (0.5 mm)\u003c\/li\u003e\n\u003cli\u003eOne of the four parts of conversion set HHA-2002\u003c\/li\u003e\n\u003cli\u003eRidged rim, so you can turn it with your fingers rather than a tool\u003c\/li\u003e\n\u003cli\u003ePacked in foam inside a labelled 0.5mm tube with a screw lid\u003c\/li\u003e\n\u003cli\u003eNeedle cap HHA-2402 (0.5 mm) screws onto its front\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat the cap does\u003c\/h3\u003e\n\u003cp\u003eAir leaving the Zephyr passes the nozzle tip inside this cap, and the cap’s opening decides how evenly it surrounds that tip. A 0.5 mm nozzle wants the 0.5 mm opening; a 0.3 mm cap on a 0.5 mm Zephyr will not spray properly.\u003c\/p\u003e\n\u003ch3\u003eIs it really the nozzle cap?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSymptom\u003c\/th\u003e\n\u003cth\u003ePart\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront edge bent, threads rough, or the cap has gone missing\u003c\/td\u003e\n\u003ctd\u003eThis 0.5 mm cap, HHA-2302\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChip or split where the nozzle narrows to its point\u003c\/td\u003e\n\u003ctd\u003e0.5 mm nozzle, HHA-2102\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeedle point curled over\u003c\/td\u003e\n\u003ctd\u003e0.5 mm needle, HHA-2202\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMore than one part damaged in a drop\u003c\/td\u003e\n\u003ctd\u003eSet HHA-2002 (the whole 0.5 mm front end)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eInspect the nozzle under magnification after any fall: damage to the cap often travels inward.\u003c\/p\u003e\n\u003ch3\u003eWhen to change it\u003c\/h3\u003e\n\u003cp\u003eLook for a burr or flattened patch on the rim, a thread that binds or lets the cap sit askew, and a pattern that leans one way despite a healthy nozzle and needle. Before blaming the part, rule out dried paint by soaking the cap in cleaner and scrubbing inside with a soft brush, such as one from the HHA-7201 set. If the fault remains, swap it.\u003c\/p\u003e\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003cp\u003eWith the air line disconnected and the nozzle already seated firmly, offer the cap up square and turn it by hand. Stop and restart if the thread catches rather than forcing it, since cross-threading harms the body. Finger-tight holds it; leave the wrench for the nozzle.\u003c\/p\u003e\n\u003ch3\u003eWorth knowing\u003c\/h3\u003e\n\u003cp\u003eTo return to 0.3 mm, fit the 0.3 mm cap HHA-2301 with its matching nozzle and needle, or the complete HHA-2001 set. Both sizes look much the same at a glance, so store whichever cap is off the airbrush in its labelled tube. Its fit is confirmed on the Hobby Heaven Zephyr alone; on any other airbrush, assume it will not fit. Each Zephyr part carries its own HHA number, and new parts keep joining the system under the same numbering.\u003c\/p\u003e","brand":"Hobby Heaven","offers":[{"title":"Default Title","offer_id":68436812431549,"sku":"HHA-2302","price":5.52,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/hobby-heaven-zephyr-0-5mm-nozzle-cap-hha-2302-2.jpg?v=1795190948","url":"https:\/\/hobbyheaven.org\/en-au\/products\/hobby-heaven-zephyr-0-5mm-nozzle-cap-hha-2302","provider":"Hobby Heaven","version":"1.0","type":"link"}