{"product_id":"hobby-heaven-zephyr-0-3mm-needle-hha-2201","title":"Hobby Heaven Zephyr 0.3mm Needle (HHA-2201) – Replacement Airbrush Needle","description":"\u003cp\u003eHHA-2201 gives you the 0.3 mm needle for the Hobby Heaven Zephyr. Its tapered point sits in the 0.3 mm nozzle: pulling the trigger back draws it away from the opening to let paint out, and releasing the trigger closes the flow. Needles get bent more than anything else on an airbrush, from a drop, a careless wipe or a rushed reassembly. Each Zephyr leaves us with a spare of this size in the box; HHA-2201 replaces that spare once it is used, so a bent point never has to end a painting session.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNeedle size 0.3 mm, for the nozzle fitted to every new Zephyr\u003c\/li\u003e\n\u003cli\u003eThe same size as the spare supplied with the airbrush\u003c\/li\u003e\n\u003cli\u003eShipped inside a clear tube printed 0.3, bedded in foam within its box\u003c\/li\u003e\n\u003cli\u003eGoes in through the nose of the airbrush, after the nozzle comes out\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIs it really the needle?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eWhat you see\u003c\/th\u003e\n\u003cth\u003eCause\u003c\/th\u003e\n\u003cth\u003eWhat to order\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoint bent or hooked; it snags when drawn lightly over a fingernail\u003c\/td\u003e\n\u003ctd\u003eBent needle\u003c\/td\u003e\n\u003ctd\u003eThis needle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThe needle wobbles instead of rolling true on a flat table\u003c\/td\u003e\n\u003ctd\u003eBent shaft\u003c\/td\u003e\n\u003ctd\u003eThis needle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSplit nozzle tip, paint escaping with the trigger at rest\u003c\/td\u003e\n\u003ctd\u003eNozzle\u003c\/td\u003e\n\u003ctd\u003e0.3 mm nozzle HHA-2101\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eA new needle is in and the spray is still poor\u003c\/td\u003e\n\u003ctd\u003eNozzle damaged as well\u003c\/td\u003e\n\u003ctd\u003eThe 0.3 mm set HHA-2001\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpatter straight after a long session\u003c\/td\u003e\n\u003ctd\u003eDried paint on the point\u003c\/td\u003e\n\u003ctd\u003eClean it, then judge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eSigns it needs replacing\u003c\/h3\u003e\n\u003cp\u003eClean off any dried paint before judging, because a crusted point sprays just as badly as a bent one. Then roll the needle across a flat surface and look at the point under magnification: it should taper to a single straight tip. A hook or a curve will never close the nozzle evenly again.\u003c\/p\u003e\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUnplug the air hose and flush the airbrush through first.\u003c\/li\u003e\n\u003cli\u003eRemove the caps and take the nozzle out with the wrench, then loosen the needle chucking nut. The old needle comes out from the front.\u003c\/li\u003e\n\u003cli\u003eSlide the new needle in from the front, refit the nozzle and caps, then move the needle forward softly until it rests in the nozzle. Forcing it can split the nozzle.\u003c\/li\u003e\n\u003cli\u003eTighten the chucking nut and try it on clean water first.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCare\u003c\/h3\u003e\n\u003cp\u003eAn airbrush lying flat on the desk is easily knocked, so rest it in a holder between coats. Hold on to the tube; it is where the next spare should live.\u003c\/p\u003e\n\u003ch3\u003eWorth knowing\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA Zephyr converted with HHA-2002 runs a 0.5 mm needle, HHA-2202. Keep this one to the 0.3 mm nozzle and caps, never mixed with 0.5 mm ones.\u003c\/li\u003e\n\u003cli\u003eBuilt for the Zephyr alone: we make no claim that it fits any other airbrush.\u003c\/li\u003e\n\u003cli\u003eOne of the numbered parts of our Zephyr system, which keeps growing; reorder by the HHA code on the pack.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hobby Heaven","offers":[{"title":"Default Title","offer_id":68436811841725,"sku":"HHA-2201","price":6.71,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/hobby-heaven-zephyr-0-3mm-needle-hha-2201-2.jpg?v=1795190851","url":"https:\/\/hobbyheaven.org\/en-au\/products\/hobby-heaven-zephyr-0-3mm-needle-hha-2201","provider":"Hobby Heaven","version":"1.0","type":"link"}