{"product_id":"hobby-heaven-inline-airbrush-moisture-trap-hha-5301","title":"Hobby Heaven Inline Airbrush Moisture Trap (HHA-5301) – 1\/8\" BSP, 5 Micron","description":"\u003cp\u003eHHA-5301 is a compact inline moisture trap fitted right at the airbrush: it threads onto the air inlet, the hose threads onto it, and air flows through the trap a moment before entering the airbrush. As compressed air travels down a hose it cools, and part of its water vapour turns back to liquid; when that reaches the nozzle it spits or leaves wet spots in the paint. Inside, a filter element rated at 5 microns stops water droplets and fine dirt, which gather in a clear polycarbonate bowl in plain view. Pushing the spring-loaded pin empties it with nothing unscrewed.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAirbrush side: 1\/8\" BSP female, in a polished cap\u003c\/li\u003e\n\u003cli\u003eHose side: 1\/8\" BSP male\u003c\/li\u003e\n\u003cli\u003eA 5-micron element filters the air\u003c\/li\u003e\n\u003cli\u003ePush-pin drain that empties the bowl in place\u003c\/li\u003e\n\u003cli\u003ePictured on the Zephyr; suits other 1\/8\" BSP airbrushes and hoses\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMoisture, or something else?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eWhat you see\u003c\/th\u003e\n\u003cth\u003eLikely cause and remedy\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eClear water spitting out, more so in long sessions or damp weather\u003c\/td\u003e\n\u003ctd\u003eMoisture: empty this trap and any trap on the compressor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSplatter at the start of strokes, or a grainy pattern\u003c\/td\u003e\n\u003ctd\u003eUsually the paint: thin it and wipe the needle tip clean\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHiss at either threaded joint\u003c\/td\u003e\n\u003ctd\u003eSnug it by hand; tape the male thread if it carries on\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrain pin hissing\u003c\/td\u003e\n\u003ctd\u003eDebris under the pin: press and release it repeatedly under air\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWater still gets through\u003c\/td\u003e\n\u003ctd\u003eIt only stops water that is already liquid: empty it more often and keep a compressor-side trap as well\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eAirbrush end or compressor end?\u003c\/h3\u003e\n\u003cp\u003eA regulator trap on the compressor handles water produced in the compressor and its tank, not moisture that forms afterwards along the hose; a trap at the airbrush covers that final stretch. With quick disconnects it can stay on the airbrush (plug HHA-5102 screwed onto the trap) or on the hose (coupler HHA-5101 or HHA-5104 on the trap). Whichever you choose, keep the drain pin on the low side while you paint.\u003c\/p\u003e\n\u003ch3\u003eFitting and care\u003c\/h3\u003e\n\u003cp\u003eShut off the air and take the hose off the airbrush. Turn the trap's cap onto the inlet by hand, then the hose onto the trap. With air restored, press the pin once, and dab soapy water on both connections. Empty it before and after every session. Keep thinners and airbrush cleaner away from the bowl, since solvents can craze or split polycarbonate; a bowl that is cracked or permanently cloudy, or a pin that keeps leaking, means a new trap.\u003c\/p\u003e\n\u003ch3\u003eWorth knowing\u003c\/h3\u003e\n\u003cp\u003eIt is not an air dryer: it cuts the risk of water landing in your paint rather than making the air fully dry. Iwata, Harder \u0026amp; Steenbeck, Sparmax, Grex and Master airbrushes take it directly; Badger, Paasche and Aztek each require their own brand's adapter. This is one of the numbered parts of the Hobby Heaven Zephyr range, which keeps growing; once a number is given, it always means the same part.\u003c\/p\u003e","brand":"Hobby Heaven","offers":[{"title":"Default Title","offer_id":68436814561469,"sku":"HHA-5301","price":7.88,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/hobby-heaven-inline-airbrush-moisture-trap-hha-5301-2.jpg?v=1795199873","url":"https:\/\/hobbyheaven.org\/en-au\/products\/hobby-heaven-inline-airbrush-moisture-trap-hha-5301","provider":"Hobby Heaven","version":"1.0","type":"link"}