{"product_id":"hobby-heaven-airbrush-quick-disconnect-set-with-air-flow-valve-hha-5104","title":"Hobby Heaven Airbrush Quick Disconnect Set with Air Flow Valve (HHA-5104) – 1\/8\" BSP","description":"\u003cp\u003eHHA-5104 is a quick-disconnect set with a second job built in. The plug lives on the airbrush and the coupler on the hose; they click together and part like any quick-disconnect, and the coupler shuts the air off once the plug is out. On the coupler sits a small knurled knob: an air flow valve, the kind often called a MAC valve, which turns the air down at your hand instead of at the compressor. Put the regulator at the session's top pressure, trim down for fine lines, stippling or thin coats, and open fully to flush cleaner.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCoupler with air flow valve: male 1\/8\" BSP thread, lives on the hose\u003c\/li\u003e\n\u003cli\u003ePlug: 5 mm nipple and female 1\/8\" BSP thread, lives on the airbrush\u003c\/li\u003e\n\u003cli\u003eKnob trims the air from fully open down to fully shut\u003c\/li\u003e\n\u003cli\u003eSpring-loaded sleeve releases the plug; air shuts off while it is out\u003c\/li\u003e\n\u003cli\u003eBoth parts packed in a Hobby Heaven blister, HHA-5104 on the label\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat the valve can and cannot do\u003c\/h3\u003e\n\u003cp\u003eAll it can do is reduce the air. The knob restricts the flow reaching the airbrush, which softens the spray, but it cannot add pressure beyond what the regulator delivers, and it has no gauge. Turned fully in, it stops the air altogether. The regulator gauge reads the pressure before the valve, so judge a trimmed setting by spraying a test card. Painters who rarely touch their pressure mid-session may prefer the cheaper plain set, HHA-5103, for the quick-release alone.\u003c\/p\u003e\n\u003ch3\u003eValve set, or something else?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eProblem\u003c\/th\u003e\n\u003cth\u003eFix\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo air reaching the airbrush\u003c\/td\u003e\n\u003ctd\u003eKnob wound fully in: open it, then make sure the plug has clicked home\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeak spray although the regulator is up\u003c\/td\u003e\n\u003ctd\u003eValve half shut: open it fully and spray again first\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHiss at a thread\u003c\/td\u003e\n\u003ctd\u003eUnsealed joint: thread-sealing tape on the male thread, then refit by hand\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHiss round the knob at every setting\u003c\/td\u003e\n\u003ctd\u003eValve seal worn: replace the set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOne half refuses to thread on\u003c\/td\u003e\n\u003ctd\u003eWrong thread on the airbrush or hose; Badger, Paasche or Aztek gear needs an adapter first\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFitting\u003c\/h3\u003e\n\u003cp\u003eCompressor off, hose bled. Tape the coupler's thread and run it into the hose by hand; tape the airbrush inlet and fit the plug the same way. Open the knob, restore the air, click the plug in and test each joint with a dab of soapy water, then set the regulator and fine-tune with the knob.\u003c\/p\u003e\n\u003ch3\u003eWorth knowing\u003c\/h3\u003e\n\u003cp\u003eThis set is not part of the Zephyr box, which comes with the plain pair. If you run several airbrushes, add an HHA-5102 plug for each one. Iwata, Harder \u0026amp; Steenbeck, Sparmax, Grex, Master and the Zephyr share the 1\/8\" BSP fitting this set is made for. Fingers only on the knob; never force it. This is one of the numbered parts of the Hobby Heaven Zephyr range, which keeps growing; once a number is given, it always means the same part.\u003c\/p\u003e","brand":"Hobby Heaven","offers":[{"title":"Default Title","offer_id":68436814135485,"sku":"HHA-5104","price":8.22,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/hobby-heaven-airbrush-quick-disconnect-set-with-air-flow-val-2.jpg?v=1795199975","url":"https:\/\/hobbyheaven.org\/en-au\/products\/hobby-heaven-airbrush-quick-disconnect-set-with-air-flow-valve-hha-5104","provider":"Hobby Heaven","version":"1.0","type":"link"}