{"product_id":"hobby-heaven-airbrush-nozzle-cleaning-reamer-hha-7301","title":"Hobby Heaven Airbrush Nozzle Cleaning Reamer (HHA-7301) – with Screw-On Cap","description":"\u003cp\u003eHHA-7301 is a nozzle reamer: a slender taper with cutting edges along it, held in a grooved, gold-finish metal handle and closed by a screw-on cap. Paint that dries inside a nozzle tends to settle right at the tip, the narrowest opening in the whole airbrush, where a brush cannot reach. Eased into a removed nozzle and rotated, the edges shave that ring of dried paint away. It is a last resort rather than an everyday tool.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSlender tapered tip with cutting edges\u003c\/li\u003e\n\u003cli\u003eGrooved handle for a light, controlled grip\u003c\/li\u003e\n\u003cli\u003eScrew-on cap that guards the point and your fingers\u003c\/li\u003e\n\u003cli\u003eFor dried paint inside a nozzle taken out of the airbrush\u003c\/li\u003e\n\u003cli\u003eHobby Heaven bag labelled HHA-7301, with barcode\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBefore you reach for it\u003c\/h3\u003e\n\u003cp\u003eMost blocked nozzles clear without anything touching the inside. Remove the nozzle (HHA-7101 is the wrench for the Zephyr) and leave it in airbrush cleaner: minutes for fresh paint, longer for old. Look through it towards a lamp; a clean, round opening means it can go back in. Only if paint is still visible is the reamer needed.\u003c\/p\u003e\n\u003ch3\u003eUsing it\u003c\/h3\u003e\n\u003cp\u003eUnscrew the cap, hold the nozzle lightly, and slide the point into the opening until it just meets resistance. Then roll the handle slowly between finger and thumb a few times each way, with no pressure behind it, and let the edges remove the paint. Withdraw, wipe, hold it up to the lamp again and go back in only if needed. Rinse the nozzle before refitting it. Turn, never push: forcing the taper deeper stretches or splits the opening, and a damaged nozzle has to be replaced.\u003c\/p\u003e\n\u003ch3\u003eReaming, or something else?\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eWhat happens\u003c\/th\u003e\n\u003cth\u003eLook at this first\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAir flows, paint does not\u003c\/td\u003e\n\u003ctd\u003eA blockage in the nozzle or channel: soak it, and ream only what the soak leaves\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpits at the start of every stroke\u003c\/td\u003e\n\u003ctd\u003eOften paint on the needle point or around the nozzle cap: clean those first\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpray split or pulling sideways\u003c\/td\u003e\n\u003ctd\u003eBent needle point or split nozzle; reaming fixes neither\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBubbles appear in the cup\u003c\/td\u003e\n\u003ctd\u003eNozzle or its cap not tight: snug them gently\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpening clear and round, yet the spray is poor\u003c\/td\u003e\n\u003ctd\u003eThen the nozzle is not the problem; check the needle, both caps and how thin the paint is\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCare\u003c\/h3\u003e\n\u003cp\u003eAfter each use, wipe the point and refit the cap straight away. Do not use it as a scribe or awl on other materials, and avoid dropping it tip first: a bent or dulled point is no good for a nozzle. Store it dry, with the cap fitted.\u003c\/p\u003e\n\u003ch3\u003eWorth knowing\u003c\/h3\u003e\n\u003cp\u003eThe finer the nozzle, the lighter the touch it needs. On the Zephyr a split nozzle is replaced by HHA-2101 (0.3 mm) or HHA-2102 (0.5 mm). This is one of the numbered parts of the Hobby Heaven Zephyr range, which keeps growing; once a number is given, it always means the same part.\u003c\/p\u003e","brand":"Hobby Heaven","offers":[{"title":"Default Title","offer_id":68436815020221,"sku":"HHA-7301","price":6.03,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0271\/9583\/4503\/files\/hobby-heaven-airbrush-nozzle-cleaning-reamer-hha-7301-2.jpg?v=1795197633","url":"https:\/\/hobbyheaven.org\/en-au\/products\/hobby-heaven-airbrush-nozzle-cleaning-reamer-hha-7301","provider":"Hobby Heaven","version":"1.0","type":"link"}