Iwata Eclipse 0.35mm Nozzle (IWS-6042) – Genuine Compression-Fit Replacement for CS, BS, SBS, Takumi

2025-06-17T11:39:07+01:00

Vendor: Tamiya
Type: Accessories
Price: 21.99

🔹 IWATA ECLIPSE E3 NOZZLE 0.35MM

Model IWS-6042 | Compression-Fit Design | Silver Alloy | Original Equipment
🏪 HOBBY HEAVEN - Authentic Art Supplies with Expert Support

⚠️ ECLIPSE SERIES ONLY ⚠️

Verify your Eclipse model before ordering - check compatibility list below

🔍 What You're Getting

This is an original Iwata replacement nozzle for Eclipse series airbrushes. Features compression-fit design (no threading), made from silver alloy with brass base. 0.35mm diameter provides versatile performance from detail work to broader coverage.

Size: 0.35mm diameter - versatile for detail and coverage work

Design: Compression-fit - no threading to strip or overtighten

Material: Silver alloy with brass base - chemical resistant and durable

🎯 Compatible Eclipse Models

✅ Direct Fit:

Eclipse BS

Eclipse CS

Eclipse SBS

Takumi Eclipse Side Feed

Vault Kustom CS

⚠️ Requires Additional Parts:
Eclipse BCS

BCS Conversion Sets

Needs E3 needle + E3 needle cap

❌ Will NOT Fit:

Revolution series

NEO series

HP/Custom series

Non-Eclipse models

📊 Nozzle Specifications

Part Number | IWS-6042
Nozzle Diameter | 0.35mm
Mounting Type | Compression-Fit (no threading)
Material | Silver alloy with brass base
Series Compatibility | Eclipse BS/CS/SBS/Takumi/Vault Kustom
Chemical Resistance | Excellent (silver alloy)
Line Capability | Fine detail to medium coverage
Type | Original Equipment Replacement

⚡ Compression-Fit Advantages

🔧
No Thread Damage

Can't strip threads or overtighten. Simply press in and remove when needed.

🧼
Easy Maintenance

Quick removal for thorough cleaning. No special tools required for basic maintenance.

🔒
Consistent Sealing

Reliable seal every time without guessing about tightness. Proper fit or it doesn't go in.

⏳
Longer Life

No wear from threading/unthreading. Nozzle lasts longer with proper care.

🚨 Signs You Need a New Nozzle

💨
Spray Issues

Irregular patterns, spitting, or inability to achieve fine lines consistently

💔
Physical Damage

Visible dents, chips, or deformation in the nozzle opening or rim

💧
Seal Problems

Air or paint leaks around nozzle area, loss of compression fit

🔄
Preventive Replacement

Keep spare on hand - nozzles are precision parts that wear with use

🔧 Installation & Care Guide

🔧Installation:

Remove old nozzle carefully

Clean nozzle seat thoroughly

Press new nozzle firmly into place

Check for proper seating

🧼Daily Care:

Clean after each session

Don't let paint dry in nozzle

Use appropriate solvents

Check for clogs regularly

🔬Deep Cleaning:

Remove for thorough cleaning

Soak in appropriate cleaner

Use soft brush if needed

Inspect for damage

🛡️Protection:

Handle carefully - precision part

Store safely when removed

Avoid dropping or impacts

Don't force if resistance felt

💬 Straight Answers About Eclipse Nozzles

🤔 How do I know if this fits my Eclipse?

Check your model number. This E3 nozzle fits BS, CS, SBS, Takumi Side Feed, and Vault Kustom CS directly. For BCS models, you also need E3 needle and needle cap.

🔧 What's special about compression-fit?

No threads to strip or overtighten. Just press in firmly and it seals. Much easier maintenance and longer nozzle life since there's no threading wear.

⏰ How often do nozzles need replacing?

With good care, 1-3 years for most users. Heavy use, poor cleaning, or accidents can require more frequent replacement. Keep a spare - they're precision parts.

📈 Will this fix spray problems?

Only if the nozzle is damaged. Won't fix needle issues, paint consistency problems, air pressure issues, or technique problems. Check the nozzle condition first.

🔧 Is installation difficult?

Very easy with compression-fit design. Remove old nozzle, clean area, press new one in firmly. If it doesn't seat easily, don't force it - check alignment.

🧼 Can I clean a damaged nozzle?

Cleaning helps with clogs, but physical damage (dents, chips) usually means replacement. Even tiny damage affects spray quality significantly.

🔄 What about generic nozzles?

Genuine Iwata nozzles have precise tolerances and material specifications. Generic ones might work but quality and fit vary. For precision work, genuine parts are worth it.

📦 Should I buy multiple nozzles?

One spare is smart for continuity. Multiple nozzles aren't usually necessary unless you want dedicated setups for different paint types or frequently damage them.

🌟 Why Buy From Hobby Heaven

✅ Genuine Iwata nozzle
with proper packaging

🚚 Same-day dispatch
on orders before 2PM weekdays

💬 Technical support
for installation questions

🔧 Stock other Eclipse parts
maintenance parts

📋 Clear compatibility info
prevents wrong orders

Restore Your Eclipse Performance

Compression-fit convenience | Same-day dispatch | Expert support

HOBBY HEAVEN
Authentic supplies, honest advice, reliable service